3D Valve Bracket 1.2Kg SGS Multi Turn Electric Actuator

Customized design valve bracket for multi-turn actuator/heavy duty rate 80%

DCL-MZZ dimension and parameters.pdf

Features

• 3D design valve bracket for different sizes of linear stroke valves smaller than DN65
• Heavy duty rear earth permanent magnet DC brushless motor with duty rate 80%
• Super small size with aluminum alloy housing for protection from dust and water
• Thermal bonded polyester coating to protect against corrosion
• Manual override with Allen handle
• Maximum 7 turns can be set and adjusted flexible
• CE marked and tested by SGS

Description

DCL provide customized valve bracket design service for both quarter turn and multiturn valve. Automatic diaphragm valves or needle valves, are commonly actuated by pneumatic actuators or linear electric actuators, and integral designed with actuators. While for some manual valve that needs to upgrade to control valve, there is no need to change whole valve. DCL can help customer to design and manufacture a suitable valve bracket per valves’ CAD drawings.

DC brushless motor’s speed is proportional to voltage and inversely proportional to output torque. Its output torque is proportional to current. So current value is used to precisely show real-time torque value and do over torque protection. This motor provides large start-up torque with strong overload capability. Permanent magnet rotor has lower temperature rise during operation than AC motor.

Specification:

IP67 Multi Turn Actuator

SGS Multi Turn Electric Actuator

NEMA4/4X Electric Valve Actuator 

3D Valve Bracket 1.2Kg SGS Multi Turn Electric Actuator Images